DWG FastView drafiting commands: revcloud, sketch, smart pen, text & multileader

In last post we have expounded some drafting commands, today let me continue the remaining drafting commands: revcloud, sketch, smart pen, text & multileader.

Revcloud

Operations:

  1. click the “Draw” button and select the “Revcloud” command;
  2. specify the start point of Revcloud by touching on the drawing area, move the finger that touching on drawing area to specify other vertexes of Revcloud, as the finger moving, it will create all other vertexes automatically. All vertexes are connected by arcs forming a Revcloud shape.
  3. end this command by lifting the finger.

Sketch

Operations:

  1. click the “Draw” button and select the “Sketch” command
  2. create sketches by dragging.
  3. confirm it by tapping “✓” keywords behind command prompts.

Smart Pen

Operations:

  1. click the “Draw” button and select the “Smart Pen” command. It is default to draw in Continuous mode. As the finger moving on the screen, the program automatically recognizes the finger trace and generates standard graphics, such as lines, polylines, circles, arcs, and so on. Object snap does not work in Continuous mode. It displays “Single” and “✓”keywords behind command prompts.
  2. click “Single” button to create a single object by Smart Pen command. As the finger moving on the screen, the program automatically recognizes the finger trace and generates a single object, such as a line, a polyline, a circle, an arc, and so on. Object snap works in Single mode. It displays “Continuous” and “✓” keywords after command prompts.
  3. confirm it by tapping “✓” keywords behind command prompts.

Text

Operations:

  1. click the “Draw” button and select the “Text” command.
  2. Specify a point to determine the text position by clicking or dragging in drawing area.
  3. you could enter Mtext and return it in popping box.
  4. tap “✓” to confirm it.

Multileader

Operations:

  1. click the “Draw” button and select the “Multileader” command.
  2. specify the start point of leader by clicking or dragging in drawing area;
  3. adjust the start point or specify the end point of leader;
  4. input the content in the popping box and tap “✓” to confirm it.

you could edit created Multileader. Tapping on the leader and arrowhead, you could stretch the pinch to adjust its direction and size; tapping on the text, you could select “Edit Text” option and modify text in popping box.

All right, those are all the drafting commands. Please enjoy the free drawing view and edit software-DWG FastView.

Share this:

4 Replies to “DWG FastView drafiting commands: revcloud, sketch, smart pen, text & multileader”

Leave a Reply

Your email address will not be published. Required fields are marked *

twenty − 3 =