اندازه گیری چند خط را در یک دقیقه یاد بگیرید

When we need to measure the length, it is not always a single line, but a polyline, even a perimeter of a rectangle.  Then in DWG FastView, how do we start poly line measure?

For example, we want to measure the total length of a cable.

Step 1. Open the drawing on which you want to measure

Suppose there is a long cable on the drawing, we want to know how long the cable is.

Step 2. Click the measure and dimension on the nav bar of DWG FastView software.

And then click distance measure, put the cursor on the starting point of the cable. Look, you will use the feature of auto capture introduced in previous post. It will automatically capture the start point, the turning point and the end point accurately.

Step 3. Click enter and you will see the result below.

The measured polyline will become yellow dotted line.

By the way, other information you'd better know

  1. Enable the object snap at the bottom of the interface.
  2. You can set the dimension style such as scale and unit.
  3. The distance and angle in the first two lines of the measurement dialog refer to the distance and angle of the last part of the line.
  4. Click behind the measurement dialog box to save the measurement results. The saved measurement results can be viewed in the record at the top of the interface.

 

 

 

 

 

 

 

 

????????? ?? ???????

????? ????? ??? ????? ?????? ??. ??????? ???????? ??????????? ??????? *